home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 1
/
Cream of the Crop 1.iso
/
UTILITY
/
CONFMT.ARJ
/
EAGL1612.LZH
/
EAGLE16.DOC
< prev
next >
Wrap
Text File
|
1990-08-11
|
14KB
|
434 lines
Sydex
EAGLE16
A Device Driver for Eagle 1600 tm MS-DOS Diskettes
EAGLE16
A Device Driver for Eagle 1600 MS-DOS Diskettes
Copyright 1990, Sydex
All Rights Reserved
Version 1.0 January, 1990
Sydex
P.O. Box 5700
Eugene, OR 97405
Voice: (503) 683-6033
FAX: (503) 683-1622
Data: (503) 683-1385
NOTICE
THIS IS NOT FREE SOFTWARE! If you paid a "public
domain" vendor for this program, you paid for the serv-
ice of copying the program, and not for the program it-
self. Rest assured that nothing ever gets to the
originators of this product from such a sale. You may
evaluate this product, but if you make use of it, you
must register your copy.
We offer several inducements to you for registering.
First of all, you receive the most up-to-date copy of
the program that we have--and we do update the product
on a regular basis. You also receive support for
EAGLE16--which can be quite valuable at times. And
finally, we include a few utilities not included in the
evaluation package. Make no mistake however--we do not
"cripple" our evaluation software--our sample programs
are fully functional and complete.
REGISTRATION INFORMATION
The non-commercial single-user registration fee for
EAGLE16 is $15.00 US. The commercial and multisystem
site fee is $50.00.
Send a check or company P.O. for the appropriate amount
to:
Sydex
P.O. Box 5700
Eugene, OR 97405
Voice: (503) 683-6033
FAX: (503) 683-1622
Major Credit Cards Accepted
Please indicate what product you are ordering and if you
have a requirement for 3.5" media. We normally ship
5.25" 360K diskettes, but we will furnish 3.5" 720K
media upon request. Orders placed outside of the U.S.
and Canada should include an additional $5.00 for air-
mail. We can accept U.S. funds only, please.
DISTRIBUTION NOTICE
This is "user-supported" software. You are hereby
granted a license by Sydex to distribute this evaluation
copy of EAGLE16 and its documentation, subject to the
following conditions:
1. EAGLE16 may be distributed freely without charge in
evaluation form only.
2. EAGLE16 may not be sold, licensed, or a fee charged
for its use. If a fee is charged in connection
with EAGLE16, it must cover the cost of copying or
dissemination only. Such charges must be clearly
identified as such by the originating party. Under
no circumstances may the purchaser be given the im-
pression that he is buying EAGLE16 itself.
3. EAGLE16 must be presented as a complete unit, in-
cluding this documentation. EAGLE16's documenta-
tion may be not amended or altered in any way.
4. In granting you the right to distribute the evalua-
tion form of EAGLE16, Sydex does not acknowledge
you as the owner of EAGLE16 in any form.
Any other use or distribution of EAGLE16 is expressly
forbidden without the written consent of SYDEX.
________________________________________________________________
"IBM", "PC DOS" and "Personal System/2" are trademarks of Inter-
national Business Machines Corporation. "MS-DOS" is a trademark
of Microsoft Corporation.
What is EAGLE16?
EAGLE16 is a device driver which supports reading and writing of
MS-DOS diskettes from Eagle 1600 tm series computers on PC XT- or
AT-compatible machines. Under DOS 3.2, the utilities FORMAT,
DISKCOPY and DISKCOMP are supported, as well as normal DOS read
and write operations.
To use EAGLE16, your computer must be PC AT-, XT- or IBM Personal
System/2 compatible. Computers such as the Tandy 2000 or the
Zenith Z-150 are not suitable because of their relative incom-
patibility. Further, your computer must be equipped with either
a 5.25" high-density (1.2 Megabyte) or 5.25" "quad" density
drive, such as the Teac 55F. The diskette adapter on your com-
puter must match the diskette drive characteristics. That is, a
high-density drive must be used with a high-density adapter.
Many manufacturers, such as Western Digital, produce high-density
diskette adapters for XT-style computers, and these may be used
successfully with EAGLE16. Currently, we support only the first
(or primary) diskette adapter in a system.
And finally, your computer needs to be running PC-DOS or MS-DOS
Version 2.0 or later. DOS 3.2 or later is preferable, but not
required. Version 2 DOS users may find that some EAGLE16 func-
tions, such as formatting, are not supported.
Installing and Using EAGLE16
Installation of EAGLE16 is straightforward. First, find the file
CONFIG.SYS in the root directory of the disk that your computer
boots (loads DOS) from. It may be possible that you do not have
a CONFIG.SYS file, in which case the next few steps will create
one. If you are unfamiliar with the CONFIG.SYS file, take time
out now and read the section in your DOS manual dealing with it,
and in particular, the DEVICE= statement.
You'll need to add a line to CONFIG.SYS of the following general
form:
DEVICE=EAGLE16.SYS /D:unit /F:format
This can be done with the program EDLIN which is supplied with
DOS, or with a text editor of your choosing. If you use a word-
processing editor, make sure that you indicate that CONFIG.SYS is
a nondocument file. If you didn't find a CONFIG.SYS, the above
line will be the only line in the file which is created.
The value of unit can range from 0 to 3 and represents the physi-
cal diskette unit to be used to read and write the Eagle 1600
diskettes. If this unit is normally called A: on your computer,
then the value of unit is 0; if B:, then unit is 1. External
drives are generally units 2 and 3.
Page 1
The value of format depends on the type of diskette drive that
you're using. If it's a high-density 1.2 megabyte unit, then the
value of format is 1. If you're using a "quad" density drive,
such as the Teac 55F, then format is 2.
If /D:unit is omitted in the configuration line, unit is assumed
to be 1. If /F:format is omitted, format is assumed to be 1 also.
The last step is to copy the file EAGLE16.SYS into the root
directory of your system or "boot" drive. Finally, re-boot your
computer. If your computer is configured with a revision of DOS
3, the following message will be displayed:
Eagle 1600 diskette driver, Copyright 1990, Sydex
All Rights Reserved.
Eagle 1600 DOS diskette unit x is accessible as drive y:
The letters x and y will take on values which depend on the con-
figuration of your computer.
If your computer is configured with a revision of DOS 2, the fol-
lowing message will be displayed:
Eagle 1600 diskette driver, Copyright 1990, Sydex
All Rights Reserved.
Eagle 1600 DOS diskette unit x installed.
In this case, the drive letter which is used to read Eagle 1600
diskettes will generally be one greater than the last drive let-
ter in use before you modified CONFIG.SYS. For example, if drive
C: was the last drive on your computer, EAGLE16 will use drive
letter D:.
As an example of the whole process described above, suppose that
we wished to add EAGLE16 to a PC-AT "clone" which has one high-
density diskette drive and a hard disk. Our CONFIG.SYS file on
drive C: might look like this after we modified it using EDLIN:
FILES = 30
BUFFERS = 10
DEVICE = EAGLE16.SYS /D:0 /F:1 (This line is added)
We then copy EAGLE16.SYS to drive C:...
COPY A:EAGLE16.SYS C:\
We then press the keys Ctrl, Alt and Del simultaneously to
"reboot" our computer. After the rebooting process has com-
pleted, the following message is displayed:
Eagle 1600 diskette driver, Copyright 1989, Sydex
All Rights Reserved.
Eagle 1600 DOS diskette unit 0 is accessible as drive D:
Page 2
We then find that Eagle 1600 diskettes placed in our A: drive can
be read and written if we refer to that drive as drive D:.
FINAL COMMENTS...
EAGLE16 was written in response to inquiries from customers who
had our CP/M diskette transfer package, but who had no way to
easily handle the Eagle 1600 DOS diskettes. We hope that this
situation is now remedied. If you experience problems in getting
EAGLE16 to work for you, or if you have questions about any Sydex
product, please give us a call.
Page 3
The Sydex Product Line
AnaDisk -- The compleat diskette utility. Nothing like it
anywhere else; scan, edit, repair and copy just about any
kind of diskette. $25.00 ($150.00 site) registration fee.
Con>Format -- Concurrent "background" diskette formatter.
Features "pop-up" operation and "hot key" activation.
You've got to see it to believe. Supports all current DOS
formats. $15.00 ($50.00 site) registration fee.
22DISK -- Transfer files, format, examine and erase files on
"foreign" CP/M diskettes on your PC. Includes tips on sup-
porting 8" and 5.25" single-density diskettes. Contains
definitions for over 200 different formats. $25.00 ($100.00
site) registration fee.
22NICE -- A CP/M 2.2 emulation package. Supports the NEC
V-series chips or performs emulation by software for both
the 8080 and Z80 processors. Includes terminal emulation
and diskette handling for common CP/M systems. Includes
22DISK. $40.00 ($150.00 site) registration fee.
TeleDisk -- Turn any diskette into a compressed data file
and vice-versa. Allows you to send and receive entire dis-
kettes via modem. Even works with some "copy-protected"
diskettes. $20.00 ($150.00 site) registration fee.
COPYQM -- Mass diskette duplicator. Format, copy and verify
multiple diskettes from a single master. Implements "no
keyboard" interaction mode and drive "round robin" servic-
ing. Supports all standard DOS formats. $15.00 ($50.00
site) registration fee.
FORMATQM -- Mass diskette formatter - format a box of dis-
kettes at a single sitting. Implements "no keyboard" inter-
action mode and drive "round robin" servicing. Supports all
standard DOS formats. $10.00 ($40.00 site) registration
fee.
Information on any of these products can be obtained from Sydex
by calling or writing us at:
Sydex
P.O. Box 5700
Eugene, OR 97405
Voice: (503) 683-6033
FAX: (503) 683-1622
Data: (503) 683-1385
Page 4